How much does an oak-frame extension cost in 2026?
An oak-frame extension brings light, space and real character to a home. But the first question almost everyone asks us is simple: how much will it cost? In this article, we share the figures we use to help clients plan their budgets, along with the decisions that push the price up or down.
Oak-frame extension cost per m²: the short answer
As a rule of thumb, budget from £2,750 per square metre (about £255 per sq ft) plus VAT for an oak-frame extension. The final cost depends on your design, specification, build route and fees, so the only way to get an accurate figure is a quote for your own project.
Every project is different, so there’s no single fixed price. Below, our design team, who design extensions for homes all over the UK, walk through each part of the budget and where you can save.
Last updated: October 2026
What’s included in the price?
What a price covers depends on your project and how you choose to build. Your quote will set out exactly what’s included, so you can see which parts of the build, such as groundworks, wall insulation, glazing and interior finishes, need budgeting for separately.
What affects the cost of an oak-frame extension?
The four biggest design factors are who designs it, how complex the shape is, the specification, and whether you build one storey or two.
Does using an architect add to the cost?
It can mean paying for design twice. An architect’s drawings still need turning into a buildable oak-frame design, which is a second cost. Our in-house design team does both in one step, for lower fees than an independent architect typically charges. Every design is also guaranteed to work in oak.
How can I keep the design cost-effective?
Keep the shape simple. A rectangular floorplan with a post-and-beam frame and a vaulted ceiling still delivers plenty of character. Curves, extra angles and long spans all add cost.
A hybrid frame also reduces the volume of oak. Softwood sections sit hidden behind ceilings and walls, while the oak stays on show where it matters.
Which specification choices increase the cost?
- Glazing: doors and windows vary widely in price depending on the size and quality of the glass and frames. It is often worth investing here for the wow factor, and our designers can balance the look against your budget.
- Renewables: solar thermal panels, solar PV and ground- or air-source heat pumps add to the build cost but lower running costs.
- Finishes: roof tiles, cladding, kitchens, bathrooms and decorative finishes all add up quickly.
- Installation: check whether your builder’s quote includes installing the fixtures and fittings.
Is a two-storey oak extension double the cost?
No. Most of a single-storey extension’s cost is in the groundworks, foundations and roof, which a two-storey extension needs anyway. Adding a second storey mainly adds the cost of the frame, walls, floors, glazing and finishes, so the cost per m² usually falls.
How does your build route affect the cost?
How you manage the build can change the total as much as the design does. A contractor who also project-manages is the most expensive route. Managing individual trades yourself is the cheapest.
| Build route | What you do | Cost |
|---|---|---|
| Contractor as project manager | Very little: they supply trades, buy materials and manage the timeline and budget | Highest: mark-up on labour and materials plus a project management fee of around 5–10% of the project cost |
| Hybrid | Buy materials, coordinate deliveries and organise interior finishes (kitchen, flooring, heating, tiling, decorating, landscaping) | Middle; your builder may let you use their trade accounts and discounts |
| Self-managed | Hire and manage every trade yourself | Lowest, but takes the most time and know-how |
What is the difference between a quote and an estimate?
An estimate is a contractor’s best guess and is not legally binding, so the final bill can exceed it. A quotation is a fixed price. A good written quote itemises the work, breaks down the costs, gives a total and states whether VAT is included. Budget from quotes, not estimates.
Why do changes on site cost so much?
Alterations once building has started nearly always increase the budget. Upgrading materials, adding features or redoing finished work all cost extra. Delays can also mean losing a booked trade to a more expensive one, and some changes may need a revised planning consent.
Are electrics, plumbing and heating included?
Check your builder’s quote. If they are not included, add them to your budget. Builders often subcontract this specialist work, so hiring those trades directly can save money.
What fees should you budget for?
On top of the build itself, allow for planning, Building Regulations, any party wall agreement and surveys. These vary by council and by site, so check current charges early.
Do I need planning permission for an oak-frame extension?
Not always. Many single-storey extensions fall under permitted development rights, in which case you won’t need to make a planning application or pay a fee. Larger projects, such as most two-storey extensions, usually need planning permission and an application fee. Rules also differ for listed buildings and protected areas. Check the Planning Portal for the latest rules and fees.
Do I need a party wall agreement?
You will if your extension is built up to, or close to, the boundary with your neighbour’s property. Allow for party wall surveyors’ fees in your budget.
How much are Building Regulations fees?
Most oak-frame extensions need Building Regulations approval. Fees are set by your local authority and depend on the size and type of work, so check your council’s current charges. If you use a private Approved Inspector instead, the total is usually similar.
Which surveys might I need?
Depending on your property and site, you may need:
- a tree survey, if trees need felling
- a soil survey, to confirm the ground is safe for foundations
- a flood risk assessment, in a flood zone
- an ecology report, if your council asks for one
- an archaeological report, in an area of archaeological interest
- a historic building report, if your home is listed
Is there VAT on an oak-frame extension?
Yes. Most single-storey and two-storey oak-frame extensions are charged VAT at the standard 20% on labour and materials. Tradespeople who are not VAT registered won’t charge VAT on their labour, but you still pay VAT on materials.
Some projects qualify for a reduced VAT rate, for example:
- converting a property in a way that changes the number of homes in it
- work on a home that has been empty for at least two years
To benefit, you must use a VAT-registered builder, because you can’t reclaim the VAT yourself. Check HMRC’s guidance on VAT for building work before you rely on it in your budget.
How much contingency should you allow?
Allow around 10% of your total costs as contingency. It covers unforeseen work and any areas where too little was budgeted. Don’t cut it to make the numbers work at the planning stage, because it is the part of the budget you are most likely to need.
Oak-frame extension cost FAQs
How much is an oak-frame extension per m²? As a rule of thumb, budget from £2,750 per m², or about £255 per sq ft, plus VAT. Your design, glazing, finishes and build route will all affect the final figure.
Is an oak-frame extension more expensive than a standard extension? Oak usually costs more than a basic block or timber extension. A hybrid frame, which hides softwood behind ceilings and walls, brings the cost closer while keeping the oak on show.
Is a two-storey oak extension cheaper per m²? Yes. The foundations and roof are needed either way, so the extra floor spreads those costs over more space.
What is the cheapest way to build an oak-frame extension? Keep to a simple rectangular plan, use a hybrid frame, avoid changes once building starts, and take on some project management yourself.
Do oak-frame extensions need planning permission? Not always. Many single-storey extensions fall under permitted development. Larger or two-storey extensions usually need planning permission.
Ready to start planning your oak-frame extension?
The best way to get an accurate figure is to talk to us about your project. Our design team can give you a guide price wherever you are in the UK. Get in touch or take a look at our oak-frame extension case studies for inspiration.
For a rough overall budget, try the Homebuilding & Renovating extension cost calculator.

